Tel:400-678-8375
Products > CW3000 Chiller > 9L 110V CW 3000 Industrial Water Chiller for 60/80W CO2 Glass Tube

9L 110V CW 3000 Industrial Water Chiller for 60/80W CO2 Glass Tube

9L 110V CW 3000 Industrial Water Chiller for 60/80W CO2 Glass Tube

Feature

Features of CW 3000 Industrial Water Chiller:

1. Radiating capacity of cw 3000 industrial water chiller: 50W/oC.

2. Small water chiller, energy saving, long working life and simple operation.

3. With water flow and over high temperature alarm functions.

4. Multi power specification, CE certification.

 

Parameters

Introduction of Portable Water Cooled Chiller
 

Industrial portable water cooled chiller CW-3000 special designed for CO2 laser cutters and engravers cooling laser device, used to 40W – 80W Co2 glass laser tube, emitting rate lower than 60%.

Small portable water cooler; With completed water flow and over high temperature alarm functions; Enclosed water tanks;
Professional forced air - cooled radiator; Equipped with alarm output port; Multiple power specifications; CE approval;
CW-3000 laser water chiller is suitable for small water cooling device; Provide stable working conditions for laser devices; Water can be used for a long time
High heat dissipating capacity and not easy to be blocked; Alarm output port can quickly protect sensitive components.
 
Installation of CW 3000 Industrial Water Chiller
 
The installation of cw 3000 industrial water chiller is very simple, the new machine for the first time using, you can install it as following steps 
A. Open the package and check the machine and all accessories
B. Open the mouth screw on the top of machine, add cooling water (Please don’t power the machine without water)
C. Connect the inlet and outlet hose between water cooler and laser engraving machine
D. Connect the power cable, turn the power switch (Note: Don’t let the water overflow)
E. Check the radiator water level again (Keep the distance between water level and mouth is 80 – 150mm)  
 
Maintenance of Sistem Chiller
 
Cooling machine sistem chiller used in long term, you should open the machine and clean the dust in order to ensure good heat dissipation
You can use non – corrosive antifreeze if you are in the northern cold regions.
 
Parameter of CW-3000 Laser Chiller
 
 
Laser Chiller Manufacturers
 
We are laser chiller manufacturers, produce water chillers for laser engraving machine,laser cutting machine, fiber laser machine, etc. used and provide after-sales service.
 
 
 
 

FEEDBACK

Product:
Name: *
Tel: *
Fax:
E-mail:
Address:
Type:  consult    complaint  suggest *
Content: *
 
Contact us

Add: Lingang Econmical Zone, Jinan ,China

TEL+86-531 88262598 

Fax +86-531 88269098

E-mail: aileen@bdwaterchiller.com 

Skype: lzchiller